Jump to:
- ODIN flashable devices
- Fastboot flashable devices


The central CF-Auto-Root thread can be found here on XDA-Developers.com. Use that thread for requests for new roots and generic discussion. Most device models have their own dedicated threads on XDA, please keep discussion about those specific models in that dedicated thread, and don't litter the central thread with them.

Please link directly to this page, or use the link you find in the table below.

Use at your own risk, I'm not responsible for bricking your device.

Make sure you get the correct file. Using the incorrect file may brick your device.

If your target device has a custom firmware flash counter, CF-Auto-Root will trigger it. If you're lucky, Triangle Away has support for your device and can be used to reset the counter.

Warning: If your device storage is encrypted, using CF-Auto-Root will wipe your data !

All downloads contain .tar.md5 files flashable in ODIN as PDA.

Make sure your device is in ODIN download mode (usually you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin3-v1.85.exe file, press the PDA button, select the .tar.md5 file, and click Start. You can find more detailed instructions and assistance at XDA.

A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

For the root to work, the device must reboot into recovery. Most devices will do this automatically after flashing these files, but in case that does not happen, please boot into recovery manually.

If you have locked bootloaders, flashing one of these will probably brick your device - with the exception of Nexus devices, which will usually automatically "OEM unlock" and wipe your data !

All downloads contain .img files bootable through Fastboot.

Make sure your device is in Fastboot mode (usually you can get there by holding VolUp+VolDown+Power when the device is turned off), then run the included script for your OS. On Linux and Mac, you may have to chmod +x root-linux/mac.sh before the script does anything.

A special boot image will load, which will install (only) SuperSU, then reboot into Android.

The included scripts perform an "OEM unlock". If this fails, the root will not work. If it succeeds, and you were not previously unlocked (first time rooting ?), it will probably wipe your data !

For some device (Sony, Verizon, etc) you may need an OEM-specific tool to unlock the bootloader. Please do not forget to check and use this tool, if provided by the OEM.